High end PCB design, PCB customization, PCB proofing, HDI PCB manufacturer
Consultation hotline
CUSTOMER SERVICE
technical support
Serial number | Term project | Technical surgery refers to the standard |
1 | Maximum number of layers | 24 floors |
2 | Maximum board size | 1000mm×700mm |
3 | Minimum board size | 5mm×5mm |
4 | Minimum line width | 0.1mm is 4mil |
5 | Minimum line distance | 0.1mm is 4mil |
6 | Minimum aperture | 0.20mm 8mil |
7 | Hole wall copper thickness | 0.025mm 1mil |
8 | Metallized aperture tolerance | ±0.075mm 3mil |
9 | Non-metalized aperture tolerance | ±0.05mm 2mil |
10 | Hole position tolerance | ±0.05mm 2mil |
11 | Overall Dimension Tolerance | ±0.13mm 5mil |
12 | Minimum solder bridge | 0.10mm 4mil |
13 | Minimum thickness﹠tolerance range | 0.2mm±0.08mm |
14 | Board warpage | Single panel≤1.0%Double panel≤0.6%Multilayer board≤0.6% |
15 | Copper skin from the edge of the board | 0.5mm (20mil) |
16 | Hole margin line margin | 0.3mm (7.87mil) |
17 | Silk screen line deviation | ±0.076mm (±3mil) |
18 | V cut alignment accuracy | ±0.2mm(±8mil) |
19 | Minimum opening window of pad | 0.076mm(3mil) |
20 | Surface treatment | Spray tin/immersion tin/gold-plated/chemical gold/OSP/immersion silver |
twenty one | Processing plate | FR-4/Aluminum substrate/CEM-1/CEM-3/94 VO/High TG |
twenty two | Impedance control | 100 ohm |
Scan the mobile terminal
Copyright © 2024 Shenzhen super speed circuit Co., Ltd. all rights reserved